Drawing-led natural stone project supplyQuangang District, Quanzhou, Fujian, ChinaSend a project drawing

Real product reference

Round Stone Table with Four Stools

A round stone table-and-stool reference configuration documented in workshop and installed photographs. The displayed form supports a drawing-led enquiry rather than a fixed retail specification.

Round stone table with matching stools in the WANQI STONE workshop
Customer-ordered table and stools made and photographed by WANQI STONE; workshop view of the tabletop, support and stools.
ReferenceReal product photography
ConfigurationDrawing-led review
InterfacesInstallation details checked
DeliveryPacking planned after review

Configuration review

Use the reference form to start the technical discussion.

The workshop photograph shows the round tabletop, open-base table structure and matching stools. The installed photograph shows the same table-and-stool form used as an outdoor set.

Table diameter, stool count, edge details, stone selection and installation interface are not inferred from the photographs. They are reviewed against the requested layout and drawing.

Minimum order: 1 set. Every set is made to the customer's approved drawing; there is no standard size. Confirm the table and stool components on that drawing before placing an order.

Order-specific confirmation

Technical and commercial details follow the drawing review.

Material, dimensions and finish
Confirmed after drawing and quantity review.
Weight
Confirmed after drawing and quantity review.
Packing
Confirmed after drawing and quantity review.
China-side production lead time
China-side production lead time is confirmed after reviewing dimensions, quantity, material, finish and customization requirements.

Project specification guide

Define the table-and-stool layout before quotation

The workshop and installed photographs document a round tabletop, open-base support and matching stool form. The quotation review needs the planned dimensions, stool arrangement and site interface rather than dimensions estimated from the photographs.

Table and seating layout
Provide the required tabletop diameter and height, stool dimensions, stool count and spacing on the site plan.
Base and installation
Show the table-base and stool support positions, proposed fixing method and the prepared foundation or paving detail.
Stone and surface
State the requested stone, colour, tabletop edge profile and finish for review.
Order and handling
Include quantity, destination, delivery date and site handling constraints so component weights and packing can be confirmed.

The photographs confirm the reference form only. Dimensions, fixing details, component weights, packing and commercial terms are confirmed for the requested project.

Send your project requirements →

Buyer decision guide

What should be checked before ordering a round stone table set?

The photographed table with four stools is a real reference arrangement. Compare component counts, assembly and receiving-site access before requesting a custom stone table and stools quotation; the photograph is not a fixed package specification.

Does the reference define the supplied set?

List the required table top, support or base, stools and any fixing parts separately. Confirm the requested stool count and whether each item is supplied assembled or as separate components. Do not assume accessories, foundations, installation or lifting equipment are included in the pictured arrangement.

Which drawing views make quotations comparable?

Use a plan to show the table footprint, stool positions and circulation space, and an elevation or section for the top, base and seats. Give component dimensions, connection details, units and a revision identifier. Load requirements and site fixing details need project-designer review; the photograph does not establish a load rating.

How should the stone appearance be agreed?

State the requested 654 or natural stone and the finish for the table and stools. Use an agreed material reference and record the acceptable colour, texture and natural-edge variation. For a set or multiple sets, identify which pieces are to be reviewed together; similar photographs do not prove identical stone or dimensions.

What packing information is needed for separate pieces?

Ask for a component-to-crate list so the table top, supports and stools can be matched when unpacked. Record actual net weight for each finished piece and gross weight and outside dimensions for each packed crate. Request protection and lifting information for review; no fixed set weight or standard crate size is inferred from the image.

What receiving details should an overseas buyer provide?

Give the destination port or postcode, door-delivery requirement, route to the placement area and whether suitable unloading equipment is available. State FOB, CIF, DDP or undecided for quotation review. Agree the transport, unloading and installation responsibilities separately; freight, duties and transit time are not fixed by the product photograph.

China project enquiry

Who reviews the project?

WANQI STONE accepts architectural and landscape stone enquiries from Quangang District, Quanzhou, Fujian, China. Real workshop photographs identify reference forms; final technical and commercial details follow the drawing and quantity review.

Quotation scope

What can the project quotation confirm?

  • The requested dimensions and drawing revision
  • Stone and finish after material review
  • Openings, interfaces or fixing details shown on the approved drawing
  • Quantity, packing and China-side production lead time after project review
  • Destination and the agreed scope of the shipping quotation

Drawing-based procurement

Compare the reference, the drawing and the quotation

A useful custom stone supplier enquiry separates what the photograph shows from what your project needs. Prepare a comparable quotation brief with these product-specific questions.

What the photographs establish
The uploaded photographs show buyer-ordered pieces made and photographed by WANQI STONE. They establish an actual fabricated reference, not a named overseas installation or a fixed specification for every future order.
Material and specification boundary
We work with 654 and natural stone. The stone for each pictured reference is not identified by appearance alone. Confirm the selected stone, finish, drawing revision and agreed tolerances for your order. Net weight and packed gross weight are separate measurements.
Items to confirm in writing
List whether you need taps, waste fittings, supports, fixings, assembly or installation advice. Do not assume these are included. The quotation should identify supplied components, excluded work and transport scope; destination fees and delivery timing remain subject to review.
What should a stone table-and-stool supplier quotation cover?

Use the round table with four stools as a reference, then specify the required stool count, table diameter, top thickness, table and stool heights, support layout and assembly needs. Add the outdoor location, access and unloading conditions for review. A photo does not establish load capacity, anchoring, weather resistance or local compliance; project requirements need separate review.

Send this product brief for review

Applications

Project uses to review with the product form.

Table and stool configuration, dimensions, stone selection and finish are confirmed after drawing and quantity review.

Matching real photographs

Reference views for this product form.

These images are used for this specific page. Product material, dimensions, finish, weight, packing and commercial terms are not inferred from photography.

Round stone table with four matching stools in an outdoor courtyard
Installed photograph of the round table-and-stool reference configuration.

Product FAQ

Drawing-led questions for this reference form.

Can the table and stool layout be reviewed from a drawing?

Yes. Layout, dimensions and project interfaces are confirmed after drawing and quantity review.

Are material and finish fixed by this reference image?

No. Material and finish are confirmed after drawing and quantity review.

Project enquiry

Send the specification, not just a product name.

Give the technical team enough context to review material, dimensions, packing and destination logistics.

Add specifications, drawings or shipping details (optional)
Need help? Email drawings to hang008613950785007@gmail.com.